Voila; new, stormy-grey-blue cardigan
Essentially, the gist is to cut each front piece on the fold through the centre front; meaning the fronts are double thickness, with one half acting as a facing. The fold at centre front is its own neat finish with no further need to do anything at all to it. Also, the front plus facing enclose the lower band between their two layers. For this reason, this technique works very well with very thin knits.
Fabric; thin blue/grey marl cotton jersey, leftover from Sam's hoodie and originally a remnant bought from the Morrison sale, although when I say remnant there was at least 5m of it! Morrison is tres generous with their "remnants", to say the least! I still have quite a lot left.
Pattern; I used the Nettie from Closet Case patterns, which is my go-to basic now for form-fitting Tshirts/bodysuits, however any tried and true Tshirt pattern could be used for this same modification.
After cutting these: the fabric is then re-folded in from each edge so as to cut those two fronts (below) on a fold, with the centre front laid on each fold. Cut from the inside shoulder edge out to the CF fold at bustline level on a straight diagonal line, to create the V-neck opening edge.
front piece at left is folded in half, front piece at right opened out along CF fold
first, stitch fronts to back at shoulders. Sandwich the back between the two fronts so that the seam allowances get tucked away between the layers. You have to twist it around it in a weird funny-looking way but it does work out.
Then trim the cardigan to the length you want it to be, taking into account the width of the lower band. Measure the around the lower edge to determine the length of the lower band and cut it to fit; allowing for a 1cm seam allowance at each end.
Pin the band to the lower edge of the cardigan, again keeping the front facings free. Stitch, between the seam allowances, right sides together.
front facing free
Now when you pull the band out and turn it all back right side out, the seam allowances are nice and neatly hidden away out of sight. Yay!
outside of cardigan? inside? impossible to tell which is which!
Attach sleeve cuffs, for this I nearly always employ this method, which gives a nice neat finish I think.
Last step; the neckband: pin the long neckband to the raw edges of the neck edge, including the facing, keeping raw edges even, right sides together and stitch.
Turn under the seam allowances of the remaining raw edge of the neckband, press, pin and slip-stitch closed by hand.
Cardigan, the Nettie, by Closet Case patterns with my own design modifications
Tshirt (under); another Nettie, white jersey, details here
Shorts; Burda 7723, pinstripe linen, details here
Thongs: Havaianas
Location; Coode St jetty, South Perth
